Thorens Td124 Service Manual

4.3 kg (11 lbs) cast iron (MkI) or non-magnetic aluminum (MkII/Optional)

Soak the felt pads around the bronze bushings with Mobil DTE Light oil until they can hold no more fluid. thorens td124 service manual

Seal the bottom plate back up (ensuring you use a fresh paper or rubber gasket to prevent leaks). Pour the manual-recommended factory viscous oil into the well before sliding the spindle back in. Note: Let the spindle sink under its own weight; forcing it down can ruin the bearing seals due to air pressure. 5. Voltage and Speed Calibration Note: Let the spindle sink under its own

Clean the linkages with a degreaser, then apply a tiny amount of fresh lithium grease or synthetic lubricant to the sliding pivot joints. To replace the original "stamped" hollow bases, providing

To replace the original "stamped" hollow bases, providing better damping.