Eliwell Sb655 C Manual !free!

When an internal fault or environmental anomaly occurs, the Eliwell SB655 C triggers built-in safety routines and outputs visual diagnostic error codes on the display. Common Error Codes

| Symptom | Possible Cause | Solution | |---------|----------------|----------| | Compressor does not start | Anti-short cycle (AC) active | Wait. Reduce AC if needed. | | | Setpoint > room temp | Lower setpoint. | | | Probe defective | Replace probe. | | Continuous defrost | dE set too high, or dS too low | Reduce dE, increase dS. | | Display shows OFF | Unit in standby | Press ON/OFF for 3s. | | Erratic temperature | Wrong probe type (P2) | Set P2 to match probe. | eliwell sb655 c manual