Jungheinrich Etv 216 Error Codes [FREE]

Rapid battery drain, sudden power cut-offs under load, or refusal to boot past the startup screen. Common Code Causes: Deep discharge protection activation. Loose or corroded main battery plugs.

| Interval | Action | Codes Prevented | |----------|--------|------------------| | | Check battery water level (lead-acid) and charge algorithm | 121 04, 121 14 | | 500 hours | Replace hydraulic return filter | 313 01, 442 05 | | 1000 hours | Re-grease steering kingpin and reach carriage rollers | 672 08, 455 12 | | 2000 hours | Replace lift chain and check limit switch cam alignment | 455 05 | | Annually | Calibrate pedal sensors and steering angle | 024 10, 672 03 | | As needed | Update FGC firmware (Jungheinrich bulletin 2021-R02 fixes spurious 174/313 codes) | Random intermittent codes | jungheinrich etv 216 error codes

The proximity sensors or encoders tracking the forward and backward movement of the reach mast are sending conflicting signals. 4. System Integration & CAN-Bus Faults (5000 - 5999 Series) Rapid battery drain, sudden power cut-offs under load,

: Handbrake Fault. This prevents the truck from driving and usually indicates the parking brake is not releasing or the sensor is faulty. : Steering Issue. Often caused by no pulses from the steering setpoint device (sensor bearing). | Interval | Action | Codes Prevented |

The ETV 216 is highly sensitive to battery health, especially with 80V or 48V lead-acid or lithium systems.

Is the machine totally inoperable, or does it move in "creep mode"?