Gibbscam Post Processor Access

You will see something like this: NCDATA(234): TOOL_ID=5, DIAM=0.5, Z_MIN=-1.234

Unlike some CAM systems that use unencrypted, easily editable text files for posts, GibbsCAM utilizes a proprietary post processing engine called . gibbscam post processor

The output of a post processor is the final NC program file. ComPost can also be used to create the final, machine-ready NC file. You will see something like this: NCDATA(234): TOOL_ID=5,

The machine moves in unexpected directions during tool transitions or at the end of a program. The machine moves in unexpected directions during tool

Your GibbsCAM post processor is just as important as your cutting tools and workholding fixtures. Investing time and resources into configuring an edit-free, certified post processor eliminates human error at the machine tool, protects your equipment, and reduces setup times.

If your machine alarms out during thread milling or helical ramping, the controller might not support 3-axis simultaneous arc moves, or the arc tolerance in the post may be too tight. Adjusting the post to output arcs as a series of short linear segments ( G01 ) can resolve this on older controls. Conclusion