Bms-tools 15-16 V 2.0.6 =link= 📥

Once the software is open:

Download v 2.0.6 from a reputable GitHub fork (official site may be down). Verify the SHA-256 checksum. Use a dedicated FTDI cable. And never change the OVP threshold unless you fully understand the chemistry of your cells. Happy monitoring. bms-tools 15-16 v 2.0.6

: Monitores individual cell voltages across all 16 channels to instantly isolate weak or sagging cells before a pack-level failure. Once the software is open: Download v 2

| Issue | Solution | | :--- | :--- | | | 1. Check if the correct COM port is selected. 2. Check if drivers are installed. 3. Swap the TX and RX wires (this is the #1 fix). | | Settings won't save | 1. You must click "Write" or "Save" after changing parameters. 2. You may need to enter the password (try 123456 or empty). | | Incorrect Voltage Reading | 1. Check if you selected the correct hardware version inside the software (some have settings for "Hardware V1.0" vs "V2.0"). 2. Ensure your battery pack actually has 15 or 16 cells connected. | | "15-16" Discrepancy | If you have a 16S BMS but only 15 cells, the software will show an error or 0V for Cell 16. You must configure the BMS for the correct number of strings (if supported by the specific hardware revision). | And never change the OVP threshold unless you

Before starting the software, gather the required hardware to physical route the data safely from your high-voltage lithium battery pack to your computer. Required Tools

Some versions lack a modern "dark mode" that is readable, with users reporting unreadable text in low-light settings.