(The -b flag runs the tool in batch/console mode without the GUI, and -i specifies the input XML file.)【7†L40-L43】
If you have ever attempted to unbrick a MediaTek (MTK) Android device or flash custom firmware, you have almost certainly crossed paths with (Smart Phone Flash Tool). This factory-level utility is the standard tool for working with MTK-powered devices—from budget smartphones to rugged tablets and even IoT development boards.
Q: How do I create an XML file for SP Flash Tool? A: You can create an XML file using a text editor, such as Notepad or TextEdit, and following the structure and guidelines outlined in this article. xml file for sp flash tool
Never use a scatter file from a different chipset or phone model. Even if the processor is the same, partition addresses can differ, which may cause a hard brick.
Newer devices (especially those with Android 12+ or MediaTek Dimensity chips) require SP Flash Tool v6 or higher. Many “XML file not recognized” problems are simply due to using an older version of the tool. (The -b flag runs the tool in batch/console
: Identifies the specific MediaTek processor (e.g., MT6768 ).
The (commonly referred to as the scatter file) is the fundamental configuration map required by the Smart Phone Flash Tool to flash firmware onto MediaTek (MTK) Android devices. Without this precise blueprint, the flashing software cannot identify the memory partitions of your smartphone or tablet, making any firmware update or recovery impossible. A: You can create an XML file using
Cause: The XML configuration file belongs to a different MediaTek processor than the one inside your phone.